1. Volkswagen T-Roc O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:06J906262M(2017-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4754)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06J906262AP(2017-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4755)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0150: Rear oxygen sensor circuit failure (contamination or loose mounting).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the exhaust manifold heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 to loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean: Soak carbon buildup with 5-10% ferric chloride solution and clean probe with soft bristle brush (no water washing).
When installing a new sensor, apply anti-seize lubricant and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$180-$250，generic $120-$180；Original rear O2 Sensor$150-$220，generic $90-$150。
labor:$120-$200(Pre-oxygen requires removal of heat shield and higher labor hours).

2. Volkswagen Golf(incl GTI/R) O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:06K906262CS(2015-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4754)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06K906262AP(2015-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4755)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0141: Rear oxygen sensor heating malfunction (sensor needs to be replaced or circuit checked).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 Loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$180-$250，generic $120-$180；Original rear O2 Sensor$150-$220，generic $90-$150。
labor:$120-$200(Pre-oxygen requires removal of heat shield and higher labor hours).

3. Volkswagen Tiguan(incl Tiguan LWB) O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:06J906262M(2016-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4754)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06J906262AP(2016-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4755)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0150: Rear oxygen sensor circuit failure (contamination or loose mounting).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove heat shield and locate front oxygen sensor (in front of three-way catalytic converter).
Spray WD-40 to loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$180-$250，generic $120-$180；Original rear O2 Sensor$150-$220，generic $90-$150。
labor:$120-$200(Pre-oxygen requires removal of heat shield and higher labor hours).

4. Volkswagen Polo O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:021906262B(2018-2023)
OE NO.:Bosch 17014(compatible with Denso 234-5117)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06A906262Q(2018-2023)
OE NO.:Bosch 16121(compatible with Denso 234-5118)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0150: Rear oxygen sensor circuit failure (contamination or loose mounting).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove heat shield and locate front oxygen sensor (in front of three-way catalytic converter).
Spray WD-40 to loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$150-$220，generic $100-$150；Original rear O2 Sensor$120-$180，generic $80-$120。
labor:$100-$150(Pre-oxygen position is more accessible).

5. Volkswagen Passat O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:06K906262CS(2016-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4754)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06K906262AP(2016-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4755)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0141: Rear oxygen sensor heating malfunction (sensor needs to be replaced or circuit checked).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 Loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$180-$250，generic $120-$180；Original rear O2 Sensor$150-$220，generic $90-$150。
labor:$120-$200(Pre-oxygen requires removal of heat shield and higher labor hours).

6. Volkswagen Arteon O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:1K0998262A(2019-2023)
OE NO.:Bosch 17169(compatible with Denso 234-5739)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:1K0998262B(2019-2023)
OE NO.:Bosch 17170(compatible with Denso 234-5740)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0150: Rear oxygen sensor circuit failure (contamination or loose mounting).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 Loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$200-$280，generic $140-$200；Original rear O2 Sensor$160-$240，generic $100-$160。
labor:$130-$220(Deeper anterior oxygen position, higher labor hours).

7. Volkswagen Atlas O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:8S0906262B(2018-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4992)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:8S0906262C(2018-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4993)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0150: Rear oxygen sensor circuit failure (contamination or loose mounting).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 Loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$220-$300，generic $150-$220；Original rear O2 Sensor$180-$260，generic $120-$180。
labor:$150-$250(Higher pre-oxygen position and higher labor hours).

8. Volkswagen Jetta O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:06K906262CS(2019-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4754)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06K906262AP(2019-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4755)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0141: Rear oxygen sensor heating malfunction (sensor needs to be replaced or circuit checked).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 Loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$180-$250，generic $120-$180；Original rear O2 Sensor$150-$220，generic $90-$150。
labor:$120-$200(Pre-oxygen requires removal of heat shield and higher labor hours).

9. Volkswagen CC O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:06K906262CS(2019-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4754)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06K906262AP(2019-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4755)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0150: Rear oxygen sensor circuit failure (contamination or loose mounting).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 Loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$180-$250，generic $120-$180；Original rear O2 Sensor$150-$220，generic $90-$150。
labor:$120-$200(Pre-oxygen requires removal of heat shield and higher labor hours).

10. Volkswagen Amarok O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:06K906262CS(2016-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4754)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06K906262AP(2016-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4755)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0150: Rear oxygen sensor circuit failure (contamination or loose mounting).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 Loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$180-$250，generic $120-$180；Original rear O2 Sensor$150-$220，generic $90-$150。
labor:$120-$200(Pre-oxygen requires removal of heat shield and higher labor hours).

11. Volkswagen T-Cross O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:06J906262M(2019-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4754)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06J906262AP(2019-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4755)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0150: Rear oxygen sensor circuit failure (contamination or loose mounting).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 Loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$180-$250，generic $120-$180；Original rear O2 Sensor$150-$220，generic $90-$150。
labor:$120-$200(Pre-oxygen requires removal of heat shield and higher labor hours).

12. Volkswagen Taos O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:06J906262M(2021-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4754)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06J906262AP(2021-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4755)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0150: Rear oxygen sensor circuit failure (contamination or loose mounting).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 Loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$180-$250，generic $120-$180；Original rear O2 Sensor$150-$220，generic $90-$150。
labor:$120-$200(Pre-oxygen requires removal of heat shield and higher labor hours).

13. Volkswagen Caddy/Multivan O2 sensor

Original part numbers and OE NO.
Upstream(Front) Oxygen Sensor part No.:(Bank 1 Sensor 1)
Original part numbers:06K906262CS(2015-2023)
OE NO.:Bosch 17169(compatible with Denso 234-4754)
Downstream(Rear) Oxygen Sensor part No.:(Bank 1 Sensor 2)
Original part numbers:06K906262AP(2015-2023)
OE NO.:Bosch 17170(compatible with Denso 234-4755)
​​​
Defender Oxygen Sensor Fault Codes&Symptom Signs
P0130：Front Oxygen Sensor Circuit Malfunction (frayed wiring harness or poisoned sensor).
P0135: Front oxygen sensor heating fault (check fuse or heating element).
P0150: Rear oxygen sensor circuit failure (contamination or loose mounting).
How to remove and how to clean？
Remove Tool:22mm Oxygen sensor sleeve, WD-40, anti-seize lubricant.
Remove Steps.
Disconnect the negative battery terminal and lift the vehicle.
Remove the heat shield and locate the front oxygen sensor (in front of the three-way catalyzer).
Spray WD-40 Loosen threads and unscrew sensor counterclockwise.
O2 Sensor clean:Soak carbon buildup with ferric chloride solution, soft bristle brush to clean probe (no water washing).
Apply anti-seize lubricant when installing a new sensor and torque to 30-40 N・m.
How much oxygen sensor cost to replace？
Auto Parts:Original Front O2 Sensor$180-$250，generic $120-$180；Original rear O2 Sensor$150-$220，generic $90-$150。
labor:$120-$200(Pre-oxygen requires removal of heat shield and higher labor hours).
caveat
Part compatible with sex: some models of oxygen sensors may vary depending on the engine model or regional configuration, it is recommended to confirm the part number by VIN code.
Troubleshooting: Use an OBD-II scanner to read specific trouble codes and diagnose them with the service manual.
Cleaning risk: Avoid touching the probe when cleaning the sensor to prevent damage; if the sensor is poisoned or the heating element fails, direct replacement is recommended.
Labor Reference: Prices vary by region and repair store, we recommend contacting your local service provider for an accurate quote.
Data Supplementary Notes
For more detailed service manuals or year-specific data, it is recommended to obtain them through your dealer or a specialized service platform.
Part number suitability: Some part numbers may be slightly adjusted due to the differences in engines models and years, it is recommended to check the specific suitability information through the VIN code.
Fault Code Diagnosis:Oxygen sensor failure may be related to the ECU software version, it is recommended to use a special diagnostic instrument for parameter calibration.
(Note: The above prices may fluctuate ±15% due to regional channel differences, real-time data suggest checking local dealers)
Provide for VW T-Roc/Golf/Tiguan/Tiguan LWB/Polo/Passat/T-Cross/Arteon/Amarok/Caddy/Multivan/Atlas/Jetta/Taos/Golf GTI/Golf R/CC/Beetle good price O2 sensor OEM repair carparts and auto replacement accessories oxygen sensor